Small Granule Chinese Medicine Lemon Tea Cutting Machine manual filling machine for creams

Product Description

Small Granule Chinese Medicine Lemon Tea Cutting Machine Coarse Crusher

I. Overview

In the crushing process in the chemical, pharmaceutical, food, rubber, wood and other industries, due to the different original shapes of the materials, it is impossible to complete the crushing process at one time for many materials, and often need to go through coarse crushing, fine crushing, and ultra-fine crushing. Waiting for the process. According to this situation, we comprehensively analyzed the characteristics of various raw materials and the existing crushing equipment, and carefully developed the WS -type universal coarse crusher.

The machine has the advantages of simple structure, small size and reasonable, convenient operation, low power consumption, good crushing effect, uniform particles, etc. It is an ideal equipment for coarse crushing, and it is ready for ultra-fine crushing.

II. Use

This machine is suitable for pharmaceutical, chemical, food, rubber, wood and other industries. It is a supporting equipment for the pre - process of micro-grinding processing. It is not restricted by the viscosity, hardness, softness and fiber of the material, and can have a good pulverizing effect on any material. The machine can also pulverize Chinese herbal medicine rhizomes, corn stalks and Forage with a certain amount of moisture.

III. Features

The coarse crusher has a horizontal crushing structure. The material enters the crushing chamber from the feed hopper, and is crushed by the impact and shear of the rotating knife and the fixed knife. The material automatically flows to the outlet under the action of the rotating centrifugal force. The machine is designed according to the "GMP" standard. The whole machine is made of stainless steel. It has simple structure, easy cleaning and low noise. It is the most ideal equipment among the coarse crushers at present.

IV. technical parameters

V. Appearance

VI. installation, debugging and use

1. After unpacking, carefully check whether the equipment is damaged during transportation.

2. Check whether there are any overly hard debris in the crushing room.

3. Check whether the fastening screws are loose, adjust the distance between the movable knife and the fixed knife according to the required particle size, and select the corresponding screen.

4. Turn on, start the motor to confirm the direction of rotation, no noise, that is, feed from the feed port for processing and production.

5. When the production is normal, the machine will run normally after five minutes of trial operation.

6. During the production process, if you need to replace the screen, just unscrew the fixing screw of the discharge hopper, then turn the discharge hopper back, unscrew the fixing screw of the fixed knife, and take out the screen from under the fixed knife. .